View TS9511RIYLT_8318827.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. july 2013 docid15707 rev 6 1/11 ts9511 precision rail-to-rail input/output 3 mhz single operational amplifier datasheet - production data features ? good precision: 800 v max. ? rail-to-rail input and output ? wide supply voltage range: 2.7 v to 12 v ? high-speed (3 mhz, 1 v/s) ? low consumption (900 a at 3 v) ? supply voltage rejection ratio: 85 db ? micropackage: sot23-5 applications ? signal conditioning ? automotive applications ? laptop/notebook computers ? transformer/line drivers ? personal entertainment (cd players) ? portable communication (cell phones, pagers) ? digital-to-analog converter buffers ? portable headphone speaker drivers description the ts9511 device is a single, precision rail-to-rail operational amplifier whose supply voltage range extends from 2.7 v to 12 v. its high-precision performance associated with an sot23-5 package make it suitable for a wide range of demanding applications, such as industrial, automotive, consumer, and computer applications. 2xw 9 && ,1 9 && ,1 2xw 9 && ,1 9 && ,1 ts9511ilt/ts9511iylt ts9511rilt/TS9511RIYLT www.st.com
contents ts9511 2/11 docid15707 rev 6 contents 1 absolute maximum ratings and operating c onditions . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3.1 sot23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
docid15707 rev 6 3/11 ts9511 absolute ma ximum ratings and operating conditions 11 1 absolute maximum ratings and operating conditions table 1. absolute maximum ratings symbol parameter value unit v cc supply voltage (1) 1. all voltage values, except differential voltage, are with respect to network ground terminal. 14 v v id differential input voltage (2) 2. the differential voltage is the non-inverting input term inal with respect to the inverting input terminal. if v id > 1 v, the maximum input current must not exceed 1 ma. in this case (v id > 1 v), an input series resistor must be added to limit input current. 1 v in input voltage (3) 3. do not exceed 14 v. v dd -0.3 to v cc +0.3 t stg storage temperature range -65 to +150 c t j maximum junction temperature 150 r thja thermal resistance junction-to-ambient (4) sot23-5 4. short-circuits can caus e excessive heating and destructive dissipation. r th are typical values. 250 c/w r thjc thermal resistance junction-to-case (4) sot23-5 81 esd hbm: human body model (5) 5. human body model: a 100 pf capacit or is charged to the specified voltage, then discharged through a 1.5 k resistor between two pins of the device. this is done for all couples of connected pin combinations while the other pins are floating. 1kv mm: machine model (6) 6. machine model: a 200 pf capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ). this is done for all couples of connected pin combinations whil e the other pins are floating. 100 v cdm: charged device model (7) 7. charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to ground through only one pin. this is done for all pins. 1.5 kv latch-up immunity 200 ma lead temperature (soldering, 10 sec.) 260 c table 2. operating conditions symbol parameter value unit v cc supply voltage 2.7 to 12 v v icm common mode input voltage range v dd -0.2 to v cc +0.2 t oper operating free air temperature range -40 to +125 c
electrical characteristics ts9511 4/11 docid15707 rev 6 2 electrical characteristics table 3. electrical characteristics at v cc = +3 v, v dd = 0 v , v icm = v cc /2, r l connected to v cc /2, t amb = 25 c (unless otherwise specified) symbol parameter min. typ. max. unit v io input offset voltage t min t amb t max 800 1500 v v io / t input offset voltage drift 2 v/c i io input offset current t min t amb t max 130 80 na i ib input bias current t min t amb t max 30 70 150 cmr common mode rejection ratio t min t amb t max 60 55 90 db svr supply voltage rejection ratio, v cc = 2.7 to 3.3 v t min t amb t max 65 60 90 a vd large signal voltage gain, v o = 2 v pk-pk , r l = 600 t min t amb t max 70 65 80 v oh high level output voltage, r l = 600 t min t amb t max 2.8 2.8 2.9 v v ol low level output voltage, r l = 600 t min t amb t max 80 250 250 mv i sc output short-circuit current 10 20 ma i cc supply current (per amplifier), no load, v icm = v cc /2 t min t amb t max 0.8 1 1.2 gbp gain bandwidth product r l = 10 k , c l = 100 pf 3mhz sr slew rate r l = 10 k , c l = 100 pf 1v/s ? m phase margin at unit gain r l = 10k , c l = 100 pf 58 degrees gm gain margin r l = 10k , c l = 100 pf 12 db e n equivalent input noise voltage f = 1 khz 25 thd total harmonic distortion v out = 4 v pk-pk , f = 10 khz, a v = 2, r l =10 k 0.01 % nv hz ----------- -
docid15707 rev 6 5/11 ts9511 electrical characteristics 11 table 4. electrical characteristics at v cc = +5 v, v dd = 0 v, v icm = v cc /2, r l connected to v cc /2, t amb = 25 c (unless otherwise specified) symbol parameter m in. typ. max. unit v io input offset voltage t min t amb t max 800 1500 v v io / t input offset voltage drift 2 v/c i io input offset current v icm = v cc /2 t min t amb t max 130 80 na i ib input bias current t min t amb t max 30 70 150 cmr common mode rejection ratio t min t amb t max 60 55 90 db svr supply voltage rejection ratio, v cc = 4 to 5 v t min t amb t max 65 60 90 a vd large signal voltage gain, v o = 2 v pk-pk , r l = 600 t min t amb t max 75 70 86 v oh high level output voltage, r l = 600 t min t amb t max 4.7 4.7 4.8 v v ol low level output voltage, r l = 600 t min t amb t max 80 300 300 mv i sc output short-circuit current 10 20 ma i cc supply current (per amplifier), no load, v icm = v cc /2 t min t amb t max 0.95 1.2 1.3 gbp gain bandwidth product r l = 10 k , c l = 100 pf 3mhz sr slew rate r l = 10 k , c l = 100 pf 1v/ s ? m phase margin at unit gain r l = 10k , c l = 100 pf 61 degrees gm gain margin r l = 10k , c l =100 pf 13 db e n equivalent input noise voltage f = 1 khz 25 thd total harmonic distortion v out = 4 v pk-pk , f = 10 khz, a v = 2, r l = 10 k 0.01 % nv hz ----------- -
electrical characteristics ts9511 6/11 docid15707 rev 6 figure 1. supply current vs. supply voltage figure 2. supply current vs. temperature figure 3. output short-circuit current vs. output voltage figure 4. output short-circuit current vs. temperature figure 5. voltage gain and phase vs. frequency, r l = 600 , c l = 100 pf figure 6. voltage gain and phase vs. frequency, r l = 10 k , c l = 100 pf
docid15707 rev 6 7/11 ts9511 electrical characteristics 11 figure 11. equivalent input noise voltage vs. frequency figure 7. slew rate vs. temperature figure 8. thd + noise vs. v out , r l = 600 figure 9. thd + noise vs. v out , r l = 2 k figure 10. thd + noise vs. frequency
package information ts9511 8/11 docid15707 rev 6 3 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack specifications, grade definitions a nd product status are available at: www.st.com . ecopack is an st trademark.
docid15707 rev 6 9/11 ts9511 package information 11 3.1 sot23-5 package information figure 12. sot23-5 package outline table 5. sot23-5 package mechanical data symbol dimensions millimeters inches min. typ. max. min. typ. max. a 0.90 1.20 1.45 0.035 0.047 0.057 a1 0.15 0.006 a2 0.90 1.05 1.30 0.035 0.041 0.051 b 0.35 0.40 0.50 0.013 0.015 0.019 c 0.09 0.15 0.20 0.003 0.006 0.008 d 2.80 2.90 3.00 0.110 0.114 0.118 d1 1.90 0.075 e 0.95 0.037 e 2.60 2.80 3.00 0.102 0.110 0.118 f 1.50 1.60 1.75 0.059 0.063 0.069 l 0.10 0.35 0.60 0.004 0.013 0.023 k 0 degrees 10 degrees 0 degrees 10 degrees
ordering information ts9511 10/11 docid15707 rev 6 4 ordering information 5 revision history table 6. order codes order code temperature range package packing marking ts9511ilt -40 c to +125 c sot23-5l tape and reel k1a1 ts9511rilt k1a3 ts9511iylt (1) sot23-5l (automotive grade) k1a2 TS9511RIYLT (1) k1a4 1. qualified and characte rized according to aec q100 and q003 or equivalent, advanced screening according to aec q001 and q 002 or equivalent. table 7. document revision history date revision changes 25-jun-2009 1 initial release. 17-dec-2009 2 modified cmr, svr, a vd , v oh , v ol , i sc and i cc values in table 3 and ta ble 4 . 19-sep-2012 3 updated title of figure 8 and figure 9 (added conditions). updated ts9511iylt order code (qualified status) in table 6 . minor corrections throughout document. 23-nov-2012 4 updated table 5 updated markings of table 6 17-jul-2013 5 added two new order codes: ts9511rilt and TS9511RIYLT with associated new pinout configuration. ta ble 6 : added footnote 1. 25-jul-2013 6 updated pinout numbers in cover page.
docid15707 rev 6 11/11 ts9511 11 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not authorized for use in weapons. nor are st products designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of TS9511RIYLT

	To Download TS9511RIYLT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .